Graco Husky 515 1/2" Air-Operated Double Diaphragm Pump - D52977

SKU

D52977

$824.50 $687.08

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

Overview

Polypropylene Fluid Section, Polypropylene Standard Air Valve (NPT) Centre Section, Polypropylene Seats, Buna Balls, Buna Diaphragms, PTFE O-Rings

Description

The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing

The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Easy-to-service air valve and ball checks
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing

Maximum Fluid Flow:	15 gpm (57 l/min)
Maximum Fluid Discharge Pressure:	100 psi (7 bars, 0.7 MPa)
Maximum Size Pumpable Solids:	3/32 in (2.5 mm)
Fluid Displacement Per Cycle:	0.04 g (0.15 litres)

More Information
Max. Flow Rate (l/min)	57
Max. Input Pressure (psi)	100
Max. Output Pressure (psi)	100
Fluid to Air Ratio	1:1
Air Inlet Size	1/4" NPT(F)
Pump Inlet/ Outlet Size	1/2" BSPT(F)
Max. Pump Speed	400 cpm
Fluid Section Material	Polypropylene
Centre Section Material	Polypropylene Remote
Porting	Polypropylene Standard Porting (NPT)
Seats	Polypropylene
Balls	Santoprene
Diaphragms	PTFE
Manifold O-Rings	PTFE

Write Your Own Review