The Husky 15120 has a 1.5 inch (38.1 mm) connection and is available in polypropylene and PVDF.
The Husky 15120 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
| Maximum Fluid Flow: | 122 gpm (462 l/min) |
| Maximum Fluid Discharge Pressure: | 25 psi (8.6 bar, 0.86 MPa) |
| Maximum Size Pumpable Solids: | 1/4 in (6.3 mm) |
| Fluid Displacement Per Cycle: | 0.66 gallons (2.5 litres) |
| Max. Flow Rate (l/min) | 454 |
|---|---|
| Max. Input Pressure (psi) | 125 |
| Max. Output Pressure (psi) | 125 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/2" NPT(F) |
| Pump Inlet/ Outlet Size | 1.5" Flange (End) |
| Max. Pump Speed | 190 cpm |
| Fluid Section Material | Polypropylene |
| Centre Section Material | Polypropylene Standard Air Valve (NPT) |
| Porting | Polypropylene End Flange ANSI/DIN |
| Seats | Polypropylene |
| Balls | PTFE |
| Diaphragms | PTFE |
| Manifold O-Rings | PTFE |
