The Husky 1050 has a 1 inch (25.4 mm) connection and is available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy.
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
| Maximum Fluid Flow: | 50 gpm (189 lpm) |
| Maximum Fluid Discharge Pressure: | 125 psi (8.6 bar, 0.86 MPa) |
| Maximum Size Pumpable Solids: | 1/8 in (3.2 mm) |
| Fluid Displacement Per Cycle: | 0.17 g (0.64 liters) |
| Max. Flow Rate (l/min) | 189 |
|---|---|
| Max. Input Pressure (psi) | 125 |
| Max. Output Pressure (psi) | 125 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/2" NPT(F) |
| Pump Inlet/ Outlet Size | 1" BSPT(F) |
| Max. Pump Speed | 280 cpm |
| Fluid Section Material | Aluminium |
| Centre Section Material | Aluminium Standard Air Valve w/Buna Seals |
| Porting | Aluminium Standard Porting (BSPT) |
| Seats | Acetal |
| Balls | Acetal |
| Diaphragms | PTFE |
| Manifold O-Rings | PTFE |
| Certification Required | ATEX |
